1 files changed, 78 insertions, 0 deletions
diff --git a/byobu/.byobu/statusrc b/byobu/.byobu/statusrc
new file mode 100644
index 0000000..048598a
--- /dev/null
+++ b/byobu/.byobu/statusrc
@@ -0,0 +1,78 @@
+#    statusrc - Byobu's default status configurations
+#
+#      Override these in $BYOBU_CONFIG_DIR/statusrc
+#      where BYOBU_CONFIG_DIR is XDG_CONFIG_HOME if defined,
+#      and $HOME/.byobu otherwise.
+#
+#    Copyright (C) 2009-2011 Canonical Ltd.
+#
+#    Authors: Dustin Kirkland <kirkland@byobu.co>
+#
+#    This program is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, version 3 of the License.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Configurations that you can override; if you leave these commented out,
+# Byobu will try to auto-detect them.
+
+# This should be auto-detected for most distro, but setting it here will save
+# some call to lsb_release and the like.
+#DISTRO=Ubuntu
+
+# Default: depends on the distro (which is either auto-detected, either set
+# via $DISTRO)
+#LOGO="\o/"
+
+# Abbreviate the release to N characters
+# By default, this is disabled.  But if you set RELEASE_ABBREVIATED=1
+# and your lsb_release is "precise", only "p" will be displayed
+#RELEASE_ABBREVIATED=1
+
+# Default: /
+#MONITORED_DISK=/
+
+# Minimum disk throughput that triggers the notification (in kB/s)
+# Default: 50
+#DISK_IO_THRESHOLD=50
+
+# Default: eth0
+#MONITORED_NETWORK=eth0
+
+# Unit used for network throughput (either bits per second or bytes per second)
+# Default: bits
+#NETWORK_UNITS=bytes
+
+# Minimum network throughput that triggers the notification (in kbit/s)
+# Default: 20
+#NETWORK_THRESHOLD=20
+
+# You can add an additional source of temperature here
+#MONITORED_TEMP=/proc/acpi/thermal_zone/THM0/temperature
+
+# Default: C
+#TEMP=F
+
+#SERVICES="eucalyptus-nc|NC eucalyptus-cloud|CLC eucalyptus-walrus eucalyptus-cc|CC eucalyptus-sc|SC"
+
+#FAN=$(find /sys -type f -name fan1_input | head -n1)
+
+# You can set this to 1 to report your external/public ip address
+# Default: 0
+#IP_EXTERNAL=0
+
+# The users notification normally counts ssh sessions; set this configuration to '1'
+# to instead count number of distinct users logged onto the system
+# Default: 0
+#USERS_DISTINCT=0
+
+# Set this to zero to hide seconds int the time display
+# Default 1
+#TIME_SECONDS=0