blob: db8e644223ba59a7bf5785079c3f2058514049d3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
/* Copyright 2023 Brian Low
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
// Enabling this option changes the startup behavior to listen for an
// active USB communication to delegate which part is master and which
// is slave. With this option enabled and theres’s USB communication,
// then that half assumes it is the master, otherwise it assumes it
// is the slave.
//
// I've found this helps with some ProMicros where the slave does not boot
#define SPLIT_USB_DETECT
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define SPLIT_TRANSPORT_MIRROR // If LED_MATRIX_KEYPRESSES or LED_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs (max 255). Higher may cause the controller to crash.
// Sets the default enabled state, if none has been set
#define RGB_MATRIX_DEFAULT_ON true
// Triggers RGB keypress events on key down. This makes RGB control feel more
// responsive. This may cause RGB to not function properly on some boards
#define RGB_TRIGGER_ON_KEYDOWN
// Disable the codes, don’t need them.
#define RGB_MATRIX_DISABLE_KEYCODES
#define ENABLE_RGB_MATRIX_BREATHING
#define ENABLE_RGB_MATRIX_SOLID_COLOR
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
// Sets the default mode, if none has been set
#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
// Sync data between the two splits. This allow the leds to be in sync in the
// two sides.
#define SPLIT_LAYER_STATE_ENABLE
#define SPLIT_LED_STATE_ENABLE
#define SPLIT_MODS_ENABLE
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET // Activates the double-tap behavior
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 200U // Timeout window in ms in which the double tap can occur.
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED D5 // Specify an optional status LED by GPIO number which blinks when entering the bootloader
#define TAPPING_TERM 200
#define TAPPING_TERM_PER_KEY
// Modify the tap-hold configuration for helping with some tap-dance keys.
// The behavior with double-tap (like c/ç) and mod-tap is to wait the delay for
// the tap-dance before reporting the key to send.
// If I release the MOD-TAP key before, the modifier is not applied and the
// host receive a sequence of two keys, which is not what I want.
//#define PERMISSIVE_HOLD
//#define HOLD_ON_OTHER_KEY_PRESS
#define COMBO_MUST_PRESS_IN_ORDER
|
